Shifts in microbial community structure and diversity in a MBR combined with worm reactors treating synthetic wastewater

The chemical oxygen demand (COD) and NH₃-N removal, membrane fouling, sludge characteristics and microbial community structure in a membrane bioreactor (MBR) coupled with worm reactors (SSBWR) were evaluated for 210 days. The obtained results were compared to those from a conventional MBR (C-MBR) operated in parallel. The results indicated that the combined MBR (S-MBR) achieved higher COD and NH₃-N removal efficiency, slower increase in membrane fouling, better sludge settleability and higher activities of the related enzymes in the activated sludge. Denaturing gradient gel electrophoresis was used to analyze the microbial community structures in the C-MBR and the S-MBR. The microbial community structure in the S-MBR was more diverse than that in the C-MBR. Additionally, the slow-growing microbes such as Saprospiraceae, Actinomyces, Frankia, Clostridium, Comamonas, Pseudomonas, Dechloromonas and Flavobacterium were enriched in the S-MBR, further accounting for the sludge reduction, membrane fouling alleviation and wastewater treatment.     

排污权有偿使用与交易制度若干问题探析——以浙江省温州市为例

排污权有偿使用与交易制度是我国一项重要的环境经济政策。文章以温州市为例,从水环境管理视角出发,探讨排污权有偿使用与交易的若干问题。着重分析温州市初始排污权核定与分配的成效、存在的问题和解决途径,利用平均治理成本等方法设计排污权有偿使用价格,研究排污权交易的实现途径。在此基础上,文章提出应探索利用地方立法权制定排污权相关法律法规、完善初始排污权核定与分配方法、优化排污权竞拍机制和实施市场化激励政策等建议。     

闲置厌氧氨氧化微生物的启动及微生物分析

文章以闲置12个月的厌氧氨氧化生物膜填料重新启动厌氧氨氧化反应器,并对反应器的活性恢复情况、脱氮效果和微生物菌群结构开展研究。实验结果表明:在启动的200 d逐渐将进水氨氮、亚硝态氮浓度从50 mg/L提高到70 mg/L,水力停留时间从12 h缩短到4 h,后期氨氮去除率达80%以上,亚硝酸盐去除率达95%。170~200 d的稳定期中,平均去除负荷0.71±0.15 kg/(m~3·d)。另外,通过高通量测序技术对反应器中微生物群落变化情况进行了系统分析。启动过程中填料中污泥微生物浮霉菌门Planctomyctes的相对丰度从13.7%增长到了36.0%,成为优势菌群。     

流域景观格局对大型底栖动物群落结构的影响研究——以太子河山区段为例

为研究太子河山区段大型底栖动物群落结构与陆地景观因子之间的相互关系,以水生态调查和遥感解译数据为基础,采用主成分分析和回归分析的方法分析了景观格局指数与大型底栖动物群落结构指数的关系,结果表明:大型底栖动物的物种数、EPT科级分类单元数(蜉蝣目、襀翅目、毛翅目)和ASPT指数与景观聚集度指数、最大斑块指数、连通度指数呈显著正相关,与景观香农多样性指数、分离度指数、景观形状指数呈显著负相关。研究结果反映了流域景观斑块的破碎化和人为干扰会对底栖动物群落结构产生负面影响,可以指导以保护河流大型底栖动物群落为目标的流域景观格局优化。     

Increasing the application of gas engines to decrease China’s GHG emissions

This paper employs a review of the technical literature to estimate the potential decrease in greenhouse gas (GHG) emissions that could be achieved by increasing the application of gas engines in China in three sectors: urban public transport vehicle; shipping; and thermal power plants. China’s gas engine development strategies and three types of gas resource are discussed in the study, which indicates that gas engines could decrease GHG emissions by 520 megatonnes (Mt) of carbon dioxide equivalent (CO_2e) by 2020. This would account for 9.7 % of the government’s target for decreasing GHG emissions and is dominated by methane recovery from the use of coal mine gas (CMG) and landfill gas (LFG) for power generation. In the public urban transport vehicle and shipping sectors the low price of natural gas and the increasing demand for the control of harmful emissions could spur the rapid uptake of gas engine vehicles. However, the development of CMG- and LFG-fuelled power plants has been limited by the unwillingness of local enterprises to invest in high-performance gas engine generators and the associated infrastructure. Therefore, further compulsory policies that promote CMG use and LFG recovery should be implemented. Moreover, strict regulations on limiting methane leakage during the production and distribution of gas fuels are urgently needed in China to prevent leakage causing GHG emissions and largely negating the climate benefits of fuel substitution. Strategies for increasing the application of gas engines, promoting gas resources and recovering methane in China are instrumental in global GHG mitigation strategies.     

FMEA和HAZOP在煤气柜风险分析中的综合应用

将故障类型和影响分析(FMEA)和危险和可操作性研究(HAZOP)相结合,对某电石生产企业的煤气柜设备和其涉及到的工艺的风险性进行了系统安全分析,并根据分析结果提出了针对性的控制措施。这两种分析方法各有所长,从不同角度系统全面地分析了潜在风险中的不安全因素,使其分析结果更加可靠、实用。     

双层内衬改造技术在埋地油罐中的应用研究

介绍了共结构双层内衬改造技术,其结构共由5层组成,分别为基础层(防腐层和加强密封层组成)、中空监测层、内衬加强层、防油防腐层和导静电层;采用该技术可对加油站埋地单层钢制油罐进行双层改造,经过罐内清洗、喷砂除锈、基础层施工、中空监测层施工、内衬加强层施工、防油防腐层施工、导静电层施工和整个系统气密性的保压检测,完成双层内衬油罐的现场改造;采用GB30040规定的Ⅰ级真空泄漏监测方法,可以在油品泄漏前报警,实现埋地油罐整体安全水平的提升,具有重要的现实意义。     

湖北省PM2.5与PM10比值分析及PM2.5时空分布特征研究

基于2012年-2014年湖北省大气污染物监测数据,通过数据反演方法,得到湖北省17个城市的PM2.5年均浓度.利用ArcGIS绘制出各城市不同年份的颗粒物浓度空间分布图,并对其进行分析.结果表明,2012年-2014年间,湖北省17个城市PM2.5与PM10年均浓度比值为0.66,PM2.5年均浓度超出国家二级标准,整体呈现上升趋势.城市方面,在多数城市PM2.5与PM10浓度上升的同时,仅武汉、黄冈和天门3个城市颗粒物浓度2014年较2013年有所下降,且武汉市PM2.5浓度下降率达12.8%,表明武汉市近两年来采取的政策措施具有较好的可行性和有效性.     

罕见冬季降雨中人工增雨微物理过程分析研究

用Micaps实时资料、CPAS卫星反演分析资料、NCEP再分析资料、ECMWF再分析资料,多普勒雷达PUP产品资料,对2015年12月1日夜间至2日凌晨沈阳地区罕见冬季降雨过程,进行了天气学分析、及大气微物理人工增雨作业条件分析,并结合沈阳地区人工增雨作业指标,得出本次降雨过程在厄尔尼诺正在发生的背景下,为常见的高空槽转东北冷涡型,水汽、动力等微物理作业条件也适合于开展人工增雨作业,并给出了相应的作业指导参数,为沈阳地区今后在冬季降雨天气过程中开展人工增雨作业积累了宝贵经验.     

远程火箭弹高弹道飞行温度环境分析

目的在不采用防热涂层的前提下,为满足远程火箭弹高弹道飞行的防热需求,提出增加壳体厚度的设计思路。方法通过弹道耦合的气动加热计算,分析不同材料、不同厚度壳体的弹头壁面在飞行过程中的温度变化情况。结果壳体厚度达到20 mm以上时,铝、钢、铜三种材料壳体的外壁面温度均低于150℃,而相同厚度的壳体,钢壳的降温能力最强。结论增加壳体厚度可以有效降低弹头壳体壁面温度。